Small Brass Moon Face Charm~ This is one of my favorite charms. I love the detail
in the face. It measures approx. 3/8" in diameter. I like to use it in polymer clay as a goddess face. Great
for cards, scrapbooks, etc. Pkg. 6
This is probably one of my all time favorite charms- the little moon face. He just seems to be timeless.
I added him to an alcohol inked domino and then added the old jewelry piece over him to frame it.
This is another example of how you can take a very small embellishment or charm and give it some presence
and punch by combining it with something else.
Fancy Brass Wings~ This charm measures approx. 1 1/8" wide and approx. 3/4" high.
There is a lot of detail on the wing part. Looks great behind the small dominos we offer. For all those "wings
& things" projects, these will be a wonderful embellishment. Pkg. 4
This piece was made using an old jewelry piece and adding the brass wings and the moon face
using Ranger Glossy Accents as the glue. It was then incorporated into a home decor piece on an art tile board-picture
shown at the bottom of this page.
The color didn't come out good on this piece, sometimes the metals and layered pieces are hard
for me to get quite right so it just doesn't do it justice.
"Curly" Brass Charm~ I really think this one could be a lot of fun! When I saw it,
my mind pictured it as a decorative feature on the side of a box. The curled part is large enough to be able to run
cording or ribbon through so I also pictured several on a book or page with ribbon curling around them. How about a
nice 70's styl flip hairdo for your doll. It has a ring on the top but can easily be snipped off with our button shank
nippers if you wish. It measures almost 1 1/4 long and approx. 3/16" at its widest point on the curl. Pkg. 6.
Brass Sand Dollar Charm~ This is a petite little charm measuring approx. 3/8" in diameter.
it comes with a ring at the top, but is easily removed with button shank nippers. It has the sand dollar form set into
the brass and the charm itself is rounded- not flat. It also comes with 3 hole on 3 sides of the charm. They add
a lot of interest to the charm. You could also use the charm and hang something from the holes, small seed beads, etc.
for a different look. Pkg. 6
Brass Threader Charm~ My first thought is to call it a
door knocker, but it would limit your ideas on it. I see it more as an embellishment you can add with a brad or adhesive
and thread chain, cord, lace, ribbon, etc. through. The open ring part is stable and does not move. You could
go with the door knocker idea and if you have a door rubber stamp or some cool collages of doors
and add it to that would be a unique look. As with all the charms, check out the measurements because
I have yet to master the art of adding things online as to their exact size-hence the measurements for everything. This
one measures 5/8" high and approx. 7/16" wide. Pkg of 4 charms.
Arrow/Spinner~ This can be used a number of ways. Use it as a movable arrow or spinner.
Insert a brad in the opening (not to tight) and then it will spin. This arrow/spinner measures approx. 3/4" long and
approx. 3/16" at its widest at the ring. Pkg. 12.
Brass Clock Hands Charm~ Since time seems to run our lives, it will, of course, be tangled
in with our cards, scrapbooks, etc. This brass charm measures aprox. 1" across from the tip of one hand to the other.
You can secure it with a brad for a fun and movable look. Try it as a spinner too. Pkg. 6.
Brass Arrow Charm~ Some charms I classify as fun and this is one of them. You can
highlight certain parts of your artwork or rubber stamps with this brass arrow charm. Many possibilities.
This charm measures approx. almost 5/8" long and approx. 3/16" at its widest. Pkg. 12.
Brass Keyhole Charm~ This keyhole charm is beautifully embossed. I love the design
it has. It is a flat charm and can be attached using the charm ring, adhere it with glue or you can use small
brads to attach it. Very versatile. It measures approx. 13/16" high including ring and measures approx. 9/16"
wide. You can try highlighting the design by applying Staz-On inks and rub off excess leaving the ink in the recess
of the design. Pkg. of 8 brass charms.
Brass Paw Charm~ Talk to the Paw!! Just too cute. It measures 7/16" from top
of ring to bottom and approx. 3/8" wide. The paw areas are recessed so you could add some color in there too with colored
Crystal Lacquer or try a little dab of acrylic paint. Not bulky. Pkg. 4.
Scary Skull & Cross Bones Brass Charm~ This is a small charm and not really bulky.
It measures approx. 3/8" high from top of ring to bottom and approx. 3/8" at is widest point. To add to its scariness
the eyes are cut out. Spooky! Could also be used as a "Caution" warning. It is shown at the bottom
of the skull keychain pictured to the right. Pkg. 8
Brass Charm Clip~Cute, huh! This charm measures approx. 3/4" long and approx. almost
1/4" wide. I have shown it from top and side so you can see how it will slide over on a book, paper, scrapbook, fabric,
etc. After you slide it on you can also dangle something from the rounded end. I had a thought recently on these
when I was figuring out a bail for a project & thought these would be perfect, glue them down to the top of your piece
and you have a unique bail for the top to slide ball chain, cording, chain, etc. through. Pkg or 4 clips
Brass Clips can be further embellished for a unique look. One has a clear embossing powder on it with
a small crystal rhinestone set in and the other is covered with Ranger Black Enamel.
Brass Charm Attacher~This can be used by glueing to the back of something add a ring so
that you can hang it from a jump ring, etc. So say you want to put add a top ring to a penny, just glue to the back
of a penny and now the penny has a little ring at the top so then you can use it in a number of different ways. It measures
approx. 7/16" long and approx. 3/16" at its widest. Pkg of 10 attachers.
These "charming" little shrink plastic dollies know how to get all "dolled" up in there favorite
Articus Studio embellishment charms!