Check out the Frozen Charlotte Doll Art Mold shown above on this page link
|Mfg Sample using PJ016 Face Mold
These flexible art molds are made with Urethane rubber and have solid backs. The images show
a finished representation of molded parts. Also, the molds may be in different colors from the one shown.
I have used these with UTEE (ultra thick embossing enamel) and they just slid right out- no stick.
It is advised you use a release agent of water to release polymer clay. For other materials, test by molding a part-
if it sticks, use a release agent.
The art molds come with an illustrated guide to molding parts and also includes detailed instructions to
complete a creative project specific to the mold you have purchased.
The standard flexible art molds measure approximately 3 1/4" x 4".
I chose these molds because they were so different than what is currently on the market.
This mold is not for use with food.
A customer recently asked about copyright policy on the molds. The mold maker says you can make one-of-a-kind
items to sell on Etsy, other internet sites, fairs, etc. She just asks that you do not use when you hire employess to
make gobs of stuff. So, pretty much an angel policy.
What you can use in the mold: polymer clay, paper clay, plaster, metal clays, craft soap, wax, UTEE (ultra thick
embossing enamel) and you may be able to find some other uses too.
Versatile~You can create one of a kind, versatile embelllishments for books, cards, jewelry, altered art, etc.
You can change the color too. For instance, paper clays can be painted with Twinkling H2O's, acrylic
paints, rub ons, Prime Elements, glaze, Ink pad inks, Pearl ex and just about anything else that can be used to paint on paper.
Add finished molded pieces to frames, mirrors, jewelry, dried wood, metal, baskets, etc.- just embellish everything!
You can further embellish with eyelets, brads, brass charms. You can use Kreinik Iron-on Threads with your paper
clay to finish the edge of the molded piece.
So you can see, the possibilities are quite endless with these molds.
Don't forget when using polymer clay to condition it first according to manufacturers instructions.
There is a measurement chart on the project insert that comes with your mold that indicates how much clay is needed to
fill each mold cavity.
Dollie Dangles Flexible Art Mold~ These set has 6 faces, 3 sets of feet/shoes, a purse, a crown and
a set of hands.
Woodland spirits Flexible Art Mold~ This set comes with 6 openings, large woodland lady (2 7/8"
x 2 3/8"); small woodland lady (1 1/4"); large and small carved wise wood man (2 1/2" x1" and 1 3/8" x 7/16" respectively);
wise owl (9/16" x 7/16") and knot hole for beads, etc. (7/16" x 3/8"). I have shown a sample made by the manufacturer-
so pretty. This is a great product to stretch you crafting dollars because you can use it again and
again to created an unlimited array of accents and embellishments, create jewelry, etc.
|Mfg sample using Woodland spirit mold
Let's Face It Flexible Art Mold~ This set contains 7 faces in assorted sizes and 1 pair of hands.
Large Ornate Key & Lock Mold~This mold has 7 pieces to it, 4 keys and 3 locks. The large skeleton
key measures approx. 2 3/4" long, the medium size key measures approx. 1 3/4" long and the small open top hole key measures
approx. 1 1/4" and the small tri-hole key measures approx. 7/8" long. The largest lock measures 1 5/8" long, the heart
shaped lock measures approx. 1 1/4" high, the small floral shaped lock measures approx. 5/8". This is a great way to
have an endless supply of keys and locks for your projects. It also comes with the instructions to make the project
shown to the right.
Hummingbird Mini Mold~This mold contains 3 molds, hummingbird, flower & leaf. You can combine
colors of clay for an interesting look, pour UTEE (ultra thick embossing enamel) in mold, plaster, craft soap, wax and maybe
a couple other things you can think of. Create unique embellishments over and over by changing colors, painting, etc. As
a frame of reference, the hummingbird measures approx. almost 1 1/2" wing end to wing end and same from tip of beak to tail
feathers. Very detailed mold.
Flexible Mini Art Mold-Tragedy/Comedy Masks~This set has 3 molds to it, tragedy/comedy mask, star and
half moon face. The molds are very detailed. For a frame of reference, the tragedy/comedy mask measures approx.
1 3/4" wide and approx. 1 1/2" high. The mold itself measures 2 7/8" x 2" approx. (I like the
sad mask--Waaaa, she has more supplies than me! ha ha)
Flexible Domino Art Mold~This mold comes with 4 different molds to it- 2 domino sizes and 1 oval cabochon
and one elyptical (football shape)cabochon. The small domino measures approx. 1 5/8" long and approx. 3/4" wide.
The larger domino measures approx. 2" high ad approx 1" wide. One of the advantages with the domino mold is that when
using clay, you can add your holes as desired, no drilling.
On the cabochons, you can fit into other metal cabochons jewelry settings. You can also draw your own image onto
the flat surface or stamp into it, add words, etc. to make it totally unique to you.
|Mfg Sample Using Mokume Gane
Flexible Cabochon Mold~ This mold has 14 different cabochons that you can mold and make jewelry from.
The sizes are 40x30 mm, 30x22mm, 25x18mm, 18x13mm, 16x12 mm, 14x10mm, 12x10mm, 10x8 mm, 8x6mm and 7x5 mm. The 2 smaller
cabochons have multiples so the 7x5mm size has 4 cabs & the next larger size has 3 cabs in the mold. All the cabochon
sizes fit standard settings.
Flexible Oak Arbor Push Mold~This mold creates 4 sizes of oak leaves, 4 acorns, twig and one cool
dragonfly. As a frame of reference, the largest oak leaf measures approx. 2 1/2" long and approx. 1 5/8" at its widest.
Great for necklaces, embellishments, earrings, etc.
|Mfg Sample Oak Arbor Parts
Typewriter Flexible Art Mold~ I think this one is pretty self explanatory. They resemble
the old fashioned typewriter keys. They measure approx. almost 1/2" in diameter and has all 26 alphabet keys plus the
period (.), money sign ($), and sign (&), exclamation point (!), question mark (?) and a blank key. Use these to
make name tags, on totes, jewelry, flipflops, charms, hats, school id, gifts, etc.
Cameos Flexible Rubber Art Mold~This mold has 6 different designs in it. There are
3 cameos that are just the cameo, there are 2 cameos that have the bezel around them included in the mold- all the work has
been done then for these and then the ring band cameo- which is great for metal clays to make a ring. The detail is
great. You can use resins in these molds, art clays, polymer clay, paper clays, soaps, plaster and wax.
|PJ046 Deep Cabochon Mold Samples
PJ046 Deep Cabochon Flexible Art Mold~This mold was designed to Amate's most popular bezels,
but you can use for any deep bezel you have. There are 3 round cabochons- the largest is 1" in diameter; 2 square cabs-
largest is 1 " across, 2 rectangle cabs and 1 oval cab. The bottom base of the cabochon is 4 mm deep with 90 degree
sides. The dome of the cab rises above the base. This allows the cabochon to dome up above the sides of the bezel
creating a rich, high 'stone' insert. You can make cabochons with bases 4mm and 2 mm deep. You can also make a
flat back cabochon with no base. By using the instructions & measurements enclosed on the insert, cabochons can
be created in a variety of depths. The extra deep cabochon mold is designed to fit the Amate bezels. Amate is
a company I used to carry- they make fine bezels and jewelry. I discontinued carrying them and decided to carry the
Nunn Patera brand instead-mainly for the difference in price. They both are a fine product. The picture of sample
bezels are all done by the manufacturer and done in polymer clay.
PJ049 Caboshapes III ~ Triangles Flexible Rubber Push Mold~
mold has 10 different sizes of softly shaped triangles. The 4 largest triangles are scaled to produced a tapered "bib"
necklace center, as seen in the manufacturers sample picture. The largest triangle shape measures approx. 2 5/8" from
top to bottom and approx. 1 1/4" at the widest on the top of the triangle. The smallest little triangle measures approx.
5/8" from top to bottom and approx 1/2" wide at the top. The mold includes a tutorial to make a bib necklace center
with sculpted details and instructions to make the sculpted details on the triangles on either side of the center triangle
mirror image. The smaller triangles can be used for earrings, dangles, or other decorative elements for your design.
The mold is not rated food safe.
|Manufacturer Sample Bib Necklace
Attention: Most things are shipping
in one day but may have the occasional extra day here and there. Still recovering from Knee Replacement surgery, Oct.
23rd. Doing pretty good but it still has its days.
so much for your patience during this time.
ATTN: MAC Users & Ipod Phone Users~
For some reason Mac/Ipods & Paypal do not work well together. For some Mac &
Ipod users, the Paypal cart will dump after several things are added to the cart. I might suggest you write the
item numbers down that come up when you "add to cart". If it does dump, you can call -740-477-1238 or email your order
email@example.com. Sorry for the inconvenience. I have notified Paypal of this problem, but so far it has not been
PLEASE make sure your Paypal ADDRESS is CORRECT before placing your
order. Thanks! It also helps to have a correct email address if I need to contact you re your order. Thanks.
When checking out with Paypal, please add your phone number. The United States Postal
Service is requiring that for all international shipments now.
Articus Studio, 8341 Old Tarlton Pike, Stoutsville, Oh 43154, 740-477-1238